Canon LV-7490 User Manual page 32

Some computers employ special signal formats which may not be tuned by Multi-scan system of this
projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those
signal formats. The projector has 10 independent memory areas to store those parameters manually
adjusted. It allows you to recall the setting for a specific computer.
1
Press the MENU button to display the
to select
button or the OK button.
2
desired item and then press the OK button
to display the adjustment dialog box. Use the
Point buttons to adjust the setting value.
Use the Point buttons to adjust the value,
eliminating a flicker from the image displayed
(from 0 to 31).
Use the Point buttons to adjust the
number of total dots in one horizontal period to
match your PC image.
Use the Point buttons to adjust the
horizontal picture position.
Use the Point buttons to adjust the
vertical picture position.
Press the OK button to show
of the connected computer.
Use the Point buttons to adjust the clamp
level. When the image has dark bars, try this
adjustment.
Use the Point
horizontal area displayed by this projector.
Use the Point buttons to adjust the vertical
area displayed by this projector.
32
and then press the Point
and
buttons to adjust the