Canon LV-7490 User Manual page 59

The Information Menu is used for checking the status of the image signal being projected and the
operation of the projector.
Direct Operation
Press the INFO. button on the remote controller
to display the Information Menu.
Menu Operation
Press the Point buttons to select the
Information. The Information Menu is displayed.
See below for displayed information.
The selected input source is displayed.
The horizontal frequency of the input signal is
displayed in , or
The vertical frequency of the input signal is
displayed in , or
Numbers of Hz doubles when during Interlace.
The selected Screen size is displayed.
Language
The selected language is displayed.
The selected lamp mode is displayed.
The cumulative lamp operating time is displayed.
, or , and
The selected Key lock icon is displayed.
or On 1 or On 2 is displayed.
The selected remote code is displayed.
The serial number of the projector is displayed.
The serial number is used to service the
projector.
The saved amount of power and the exhausted
CO2 are displayed.
when no signal.
when no signal.
are displayed.
59