Aar Channel Entry - Icom iC-F3161DT Instruction Manual

3
BASIC OPERATION

■ AAR Channel Entry

Depending on the pre-setting, the transceiver has the
capability to directly input the AAR (Association of American
Railroads) channel, using the keypad.
When the AAR channel is input, TX/RX frequencies and
Wide/Narrow settings are changed according to the "AAR
Railroad Industry 160 MHz Channel Plan."
q Push a desired channel number using the keypad, then
push [#] to set the AAR channel.
• If a 6-digit number is entered, the AAR channel is automatically
set without pushing [#].
w To return to the normal channel display, rotate [ROTARY
SELECTOR].
[Example]
➥ Push [1], [2], then [#] to set the operating channel as TX
Channel: 12 (Wide), RX Channel: 12 (Wide).
12_
LOCK SCAN SCAD
17
T12 R12
LOCK SCAN SCAD
➥ Push [1], [2], [3], then [#] to set the operating channel as
TX Channel: 123 (Narrow), RX Channel: 123 (Narrow).
123_
LOCK SCAN SCAD
➥ Push [1], [2], [3], [4], then [#] to set the operating channel
as TX Channel: 12 (Wide), RX Channel: 34 (Wide).
1234_
LOCK SCAN SCAD
➥ Push [1], [2], [3], [0], [4], [5] to set the operating channel as
TX Channel: 123 (Narrow), RX Channel: 045 (Narrow).
T123 R045
LOCK SCAN SCAD
T123 R123
LOCK SCAN SCAD
T12 R34
LOCK SCAN SCAD