Removing The Half Fairings - Honda 2006 CBF1000/A Owner's Manual

REMOVING THE HALF FAIRINGS

The side fairings (1) must be removed in order
to perform maintenance in the area of the
headlight unit.
Removal:
1. Remove the two upper and lower hex
screws (2).
2. Remove the lower clip (3) from its seat by
pressing it in the centre and then
withdrawing it.
3. Remove the bolt (4).
4. Disengage the tabs (5) from their locations
and slide the half-fairing forwards until it is
freed from the front locking mechanism (6).
5. Disconnect the front turn signals cable
connector.
Installation:
1. Reassemble the parts by following the
removal procedure in reverse.
54
(6)
(4)
(1)
(1) Left half fairing
(2) Socket screws
(3) Clip
(4) Bolt
(2)
(5)
(2)
(3)
(5) Tabs
(6) Front locking
mechanism