Honda 2006 CBF1000/A Owner's Manual page 113

9. If the feeler gauge inserts easily, tighten the
left axle pinch bolt (3) to the specified
torque.
Axle pinch bolt torque:
22 N•m (2.25 kgf•m)
If the feeler gauge cannot be inserted easily
pull the left fork outward or push inward to
adjust the clearance. Then tighten the left
axle pinch bolts to the specified torque.
10. After installing the wheel, apply the brakes
several times, then recheck both discs for
caliper holder to disc clearance. Do not
operate the motorcycle without adequate
clearance.
• Check for free wheel rotation after the
brake lever is released. Recheck the wheel
if the brake drags or if the wheel does not
rotate freely.
• Verify proper brake operation before riding.
104
Failure to provide adequate disc to caliper
holder clearance may damage the brake
discs and impair braking efficiency.
If a torque wrench was not used for
installation, see your Honda dealer as soon as
possible to verify proper assembly. Improper
assembly may lead to loss of braking
capacity.