Honda 2006 CBF1000/A Owner's Manual page 111

Installation:
1. Position the front wheel between the fork
legs and insert the axle (4) from the left side
through the left fork leg and wheel hub.
2. Align the index line (6) of the axle shaft with
the surface (7) of fork leg.
3. Tighten the axle bolt (5) to the specified
torque.
Front axle torque:
59 N•m (6,0 kgf•m)
4. Tighten the axle pinch bolt (3) on the right
fork leg to the specified torque:
22 N•m (2,25 kgf•m)
5. Install the right and left caliper assembly to
the fork legs and tighten the fixing bolts (2)
to the specified torque:
30 N•m(3,1 kgf•m)
To avoid damaging the brake pads while
installing the caliper assembly, carefully fit
both brake disks between the pads.
Take care not to damage the ABS sensor (if
present) on the right caliper. (CBF1000A)
102
6. Temporarily tighten the axle pinch bolt (3)
on the left fork leg until lightly seat.
(6) Index line
(7) Surface
(6)
(7)