Controlling The Projector Using Rs-232C Or Telnet; View Setting Detail List ([V]View All Setting); Set Items - Eiki DLP EIP-4500 Setup Manual

Controlling the Projector Using RS-232C or Telnet

Enter number or symbol of item to be selected on the SETUP MENU. When setting, input the
details to be set. Setting is carried out one item at a time, and saved at the end.
View Setting Detail List
([V]View All Setting)
▼SETUP MENU
---------------------------------SETUP MENU--------------------------------
[1]IP Address
[4]User Name
[6]RS-232C Baud Rate [7]Projector Name
[A]Advanced Setup
[V]View All Setting
setup>v
Model Name : EIP-4500
Projector Name : EIP-4500
MAC Address : 00:0b:2c:01:14:00
IP Address : 192.168.150.2
Subnet Mask : 255.255.255.0
Default Gateway : Not Used
RS-232 Baud Rate : 9600 bps
Password : Not Required
**********(Advanced Status)**********
Data Port : 10002
Accept IP Address : Accept All
Auto Logout Time : 5 minutes
Search Port : 9300
1 1 1 1 1 Enter "v" and press the "Enter" key.
Display all setting values(*).
Downloaded From projector-manual.com EIKI Manuals
[2]Subnet Mask [3]Default Gateway
[5]Password
[D]Disconnect All
[S]Save & Quit [Q]Quit Unchanged

Set Items

Example: When setting IP Address (change from
192.168.150.2 to 192.168.150.3)
▼SETUP MENU
---------------------------------SETUP MENU--------------------------------
[1]IP Address
[4]User Name
[6]RS-232C Baud Rate [7]Projector Name
[A]Advanced Setup
1 [V]View All Setting
setup>1
IP Address : 192.168.150.2
Please Enter : 192.168.150.3
(change) —> 192.168.150.3
---------------------------------SETUP MENU--------------------------------
[1]IP Address
*
[4]User Name
[6]RS-232C Baud Rate [7]Projector Name
[A]Advanced Setup
[V]View All Setting
setup>v
Model Name
Projector Name
MAC Address
IP Address
Subnet Mask
Default Gateway
RS-232C Baud Rate : 9600 bps
Password
**********(Advanced Status)**********
Data Port
Accept IP Address : Accept All
Busy Reply
Input Hold Time
Auto Logout Time
Search Port
1 1 1 1 1 Enter "1" (number of item to be set), and press
the "Enter" key.
Display current IP address (*1).
2 2 2 2 2 Enter IP address to be set and press the "En-
ter" key.
Display IP address after change (*2).
3 3 3 3 3 Enter "v" and press the "Enter" key to verify
setting detail list.
IP address is being changed (*3).
Note
• Verification of setting detail list can be omitted.
• Setting details are not effective until they have
been saved. (Page 32)
• If an invalid number is entered, an error message
("Parameter Error!") will be displayed.
[2]Subnet Mask [3]Default Gateway
[5]Password
[D]Disconnect All
[S]Save & Quit [Q]Quit Unchanged
[2]Subnet Mask [3]Default Gateway
[5]Password
[D]Disconnect All
[S]Save & Quit [Q]Quit Unchanged
: EIP-4500
: EIP-4500
: 00:0b:2c:01:14:00
: 192.168.150.3
: 255.255.255.0
: Not Used
: Not Required
: 10002
: ERR+<CR> code
: 1000 milliseconds
: 5 minutes
: 9300
1
*1
2
*2
3
*3
31