Product Information; Understanding The Leds; Other Sources Of Information - HP RDX USB 3.0 Start Here Manual

3
Using the RDX Removable Disk
Backup System
To load a cartridge:
Push the cartridge gently into the unit until it is locked into place with
a clicking sound.
To unload a cartridge:
Wait until the cartridge Activity LED is solid green and push the Eject
button. (Eject only works correctly if HP RDX Removable disk utility
is installed.)
4

Understanding the LEDs

Activity LED
Activity LED
• Blinking Green: Cartridge is connected to an RDX service (reading,
writing, seeking activity).
• On Amber: The drive has detected a cartridge fault condition.
Eject Button/Power LED
• Off: No power.
• On Green: The drive is ready for use.
• Blinking Green: The drive is ejecting the cartridge.
• On Amber: There is a fault with the drive.
• Blinking Amber: The drive is waiting for cartridge activity to
complete before ejecting.
Eject button/Power LED
5

Product information

Product documentation
Product documentation is available in the Storage section of the HP
Enterprise Information Library:
www.hp.com/go/storage/docs
To find information for this product:
1. In the Products and Solutions pane, select HP StoreEver Tape.
2. Selct the types of documents and your languages.
3. In the HP StoreEver Tape pane, select your product.

Other sources of information

• www.hp.com/storage/spock (for computer, OS and software
compatibility).
• www.hp.com/support/ (for latest product details).
© 2014 Hewlett-Packard Development Company, L.P.
www.hp.com
*484931-003*
484931-003