Pentair Pool Products SuperFlo Installation And User Manual page 14

Hide thumbs Also See for SuperFlo:
Table of Contents

Advertisement

6
Cleaning the Pump Strainer Basket, (Continued).
9. Reinstall the lid by placing the clamp and the lid on the pot; see
10. Be sure the lid O-ring is properly placed. Seat the clamp and lid then turn clockwise until the handles are
horizontal; see
Figure 4.
WARNING — THIS FILTER OPERATES UNDER HIGH PRESSURE.
When any part of the circulating system (e.g., Lock Ring, Pump, Filter, Valves, etc.) is serviced, air
can enter the system and become pressurized. Pressurized air can cause the lid to separate which
can result in severe injury, death, or property damage. To avoid this potential hazard, follow these
instructions.
11. Turn the power "ON" at the house circuit breaker. Reset the pool time clock to the correct time
12. Open the manual air relief valve on top of the filter.
13. Stand clear of the filter. Start the pump.
14. Bleed air from the filter until a steady stream of water comes out. Close the manual air relief valve.
SuperFlo
Pump Installation and User's Guide
®
CLAMP
LID
O-RING
BASKET
VOLUTE
Figure 3.
Figure
3.
VOLUTE
Figure 4.
LID
CLAMP

Advertisement

Table of Contents
loading

Table of Contents