IBM eServer 380 xSeries User Reference Manual page 43

Menu item
Platform event paging setup
Emergency management port
(EMP) setup
Description
Configures platform event paging features.
Blackout period
The amount of time between telephone pages.
Modem page string
The paging service number and the message
character string.
Enables remote server management over a modem or a
direct serial connection.
Access mode
Defines EMP port access.
Restricted access mode
Enables or disables restricted access mode.
Connection mode
Configures the method of connection to the port.
Data carrier detect mode
Enables or disables monitoring of the data
carrier detect signal.
Baud rate
Configures the maximum rate that data is
transmitted through the EMP port.
Flow control
Enables or disables the flow control.
Modem Init string
Defines the modem initialization string.
Modem hangup string
This string is sent to the modem when the EMP
ends the session.
Modem ESC sequence
The value sent to the modem before sending a
command string to the modem.
Modem phone number
The telephone number of the modem connected
to the server.
Set password
Defines the password to restrict EMP access
through the direct serial connection or modem.
Chapter 4. Configuring your server
29