Amidiag Shortcuts - IBM eServer 380 xSeries User Reference Manual

AMIDiag Shortcuts

The following illustration shows the keyboard shortcuts for the AMIDiag program.
The following table contains the various keyboard shortcut combinations to run certain
AMIDiag tests:
To run the test or test group...
Run all AMIDiag tests.
Run a complete overall system quick test
Run all system board diagnostic tests.
Run all memory diagnostic routines.
Run all IDE drive diagnostic routines.
Run all diskette diagnostic routines.
Run all keyboard diagnostic routines.
Run all video diagnostic routines.
Run all serial, parallel, and mouse
diagnostic routines.
Print a report about system configuration
and test errors.
Exit AMIDiag.
Do this
Press F7, then F10.
Press F8, then F10.
Select the System menu. Press F6, then
F10.
Select the Memory menu. Press F6, then
F10.
Select the IDE menu. Press F6, then F10.
Select the Floppy menu. Press F6, then F10.
Select the Keyboard menu. Press F6. Press
F10.
Select the Video menu. Press F6. Press
F10.
Select the Misc. menu. Press F6. Press F10.
Select the Options menu. Select Generate
Reports. Select the print device.
Press Esc. Select Yes at the prompt.
Chapter 6. Solving Problems
59