Features And Specifications - IBM eServer 380 xSeries User Reference Manual

Features and specifications

The following table provides a summary of the features and specifications for your
xSeries 380.
*KB equals approximately 1000 bytes. MB equals approximately 1 000 000 bytes. GB
equals approximately 1 000 000 000 bytes.
2
xSeries 380: User's Reference
Microprocessor:
® ®
• Intel Itanium
microprocessor
• 2 or 4 MB* of level-3
cache 133 MHz front-
side bus (FSB)
• Support for up to four
microprocessors
Memory:
• Standard: 1 GB*(4-256
MB DIMMs)
• Maximum: 64 GB (64-1
GB DIMMs)
• Type: PC100, version
1.2 buffered, ECC,
SDRAM
• Slots: 64 dual inline
Standard drives:
• Diskette: IDE 120 MB
(LS120)
• CD-ROM: IDE
• Hard disk drives: Two
36 GB hot-swap low
voltage differential SCSI
(LVDS) drives
Redundant cooling:
Six hot-swap fan assemblies
PCI expansion slots:
• Eight hot-plug 66 MHz
64-bit
• Two non-hot-plug 33
MHz 64-bit (reserved)
Hot-swap power supplies:
• Four 800-watt (110 -208
V ac)
Video:
• ATI RAGE controller
• Compatible with SVGA
and VGA
• 8 MB video memory
Size:
• Height: 31.12 cm (12.25
inches, 7U)
• Depth: 44.45 cm (17.5
inches)
• Width: 71.12 cm (28.0
inches)
• Maximum weight: 68.1
kg (150 lb) depending
on configuration
Environment:
Air temperature: 10° to 35°C
(50° to 95°F)
Heat output
Approximate heat output in
British thermal units (Btu)
per hour: 6174 Btu
Installation requirements:
• Front clearance: 3 in.
• Rear clearance: 8 in.
Integrated functions:
• QLogic ISP12160 low
voltage directive SCSI
(LVDS) controller
• Integrated service
processor
• Video port
• Mouse port
• Keyboard
• Parallel port
• Two serial ports
• Two Universal Serial
Bus (USB) ports
• System controls and
indicators
• Basic input/output
system (BIOS), power-
on self-test (POST),
and Setup utility stored
in a flash memory
device.