End-Of-Call Options; Saving A Phone Number - Sanyo VI-2300 User Manual

End-of-Call Options

To display the following options, press Options (right softkey) within
10 seconds after disconnecting a call. To select an option, highlight it
and press
Call Again to dial the phone number.
Call:Speaker On to dial the phone number in speakerphone mode.
Save Phone# to save the phone number in your Contacts list.
Note:
The End-of-Call options are not displayed for calls identified as No ID or
Restricted.

Saving a Phone Number

Your Sprint PCS Vision Phone can store up to 500 phone numbers in
up to 300 Contacts entries (an entry may contain up to seven
numbers). Each entry's name can contain 16 characters. Your phone
automatically sorts the Contacts entries alphabetically. (For more
information, see Section 2G: Using the Contacts Directory on page 87.)
To save a number from standby mode:
1.
Enter a phone number.
2. Press Options (right softkey).
3. Highlight Save Phone# and press
4. Select a label by highlighting Mobile, Home, Work, Pager, Fax,
Other, or No Label and press
5.
Enter a name and press
Once you have stored an entry in the Contacts list, you are
prompted to select the following entry modes:
6. Press Save (left softkey).
7. Press Done (left softkey) to return to standby mode.
Section 2A: Your Sprint PCS Vision Phone – The Basics
.
Go to Phone Book appears when the number is already in
your Contacts list. (See "Saving a Phone Number" below.)
New Name to enter a new name.
From Ph. Book to select a name from the Contacts entry list.
.
.
.
31