PHILLIPS LASER INSTALLATION
If you are receiving Disc cannot be recognized it may be dirty or damaged errors on your Phillips
DVD drive you can replace the laser to resolve the issue
What you'll need:
Phillips Xbox DVD drive with failing laser
Replacement Laser
Phillips #1, #0, #00
Regular precision drivers for prying
15W soldering iron
Prepare your laser. Always use ESD precautions when working on electronics. Note the two blobs
of solder that exist in the green circle on the left but are removed in the laser on the right (You can
see a dark line that forms between the two solder pads once the solder is removed)
Page 42 of 87