Table of Contents
Advertisement
You can adjust the balance of your machine from its feet.
• • • •
First, loosen the plastic adjustment nut.
• • • •
Adjust by rotating the feet upwards or downwards.
• • • •
After the balance has been reached, tighten the plastic adjustment
• • • •
nut again by rotating it upwards.
Never put cartons, wooden blocks or similar materials under the
• • • •
machine to balance the irregularities on the level of the ground.
ELECTRICAL CONNECTION
Your washing machine works with 220-240V and 50Hz.
• • • •
A special grounded plug has been attached to the network cable of
• • • •
your washing machine. This plug must definitely be inserted to a
grounded socket with 10 ampere. The fuse flow value of the
electricity line attached to this should also be 10 ampere. If you have
no such sockets and fuses in your house, let it be made by a qualified
electrician.
Our company will not be responsible for any damages that may
•
occur as a result of usage without grounding.
Insert the machine's plug to a grounded socket which you can
•
easly reach.
WATER SUPPLY CONNECTION
Depending on the features your machine,may be with single water
•
inlet(cold) or double water inlet (cold/hot). The white headed hose is
for cold water inlet and red headed hose is for hot water inlet (valid
for machines with hot&cold water inlet).
To prevent leakage from the connection joints, 1 (valid for cold water
•
inlet) or 2 (valid for machines with hot&cold water inlet) seals are
included in the hose packing. Fit these seals at the end of water inlet
hoses on the tap side.
Connect the white headed hose to the water inlet valve with white
•
filter and connect the red headed hose to the water inlet valve with
red filter (latter is valid in machines with hot&cold water inlet). Tighten
the plastic parts of the connections with your hand.Please call a
qualified plumber for safer connections.
4
Advertisement
Table of Contents
