Table of Contents
Advertisement
If you will not use your machine for a long time, unplug your machine,
• • • •
close the water supply and leave the door open in order to keep the
inside of the machine dry and for prevention from unpleasant odour.
As a result of the quality control procedures, a certain amount of
• • • •
water may remain in your machine. This is not harmful for your
machine.
SECTION 2: INSTALLATION
You must pay attention to the following issues before using your washing
machine.
REMOVAL OF TRANSPORTATION SCREWS
Transportation screws, which are located at the back side of the
• • • •
machine, must be removed before running the machine.
Loosen the screws by rotating counterclockwise by a suitable wrench.
• • • •
(DIAGRAM-1)
Remove the screws by pulling them.(DIAGRAM-2)
• • • •
To the holes where the transport screws have been removed, insert
• • • •
the plastic transport screw taps found in the accessories bag.
(DIAGRAM-3)
The transportation screws, that have been removed from the machine
• • • •
should be kept in hand for any other transportation necessities.
DIAGRAM-1
ADJUSTMENT OF FEET
Do not install your machine on rugs or similar surfaces.
• • • •
For your machine to work silently and without any vibration, it should
• • • •
be settled on a flat, non-slippery and tough ground.
DIAGRAM-2
3
DIAGRAM-3
Advertisement
Table of Contents
