Connect Dvr To Network; Computer And Smartphone Access - Bunker Hill Security 62463 Owner's Manual & Safety Instructions

Computer and Smartphone Access

Read the ENTIRE IMPORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
IMPORTANT! YOU MAY NEED TO HIRE AN IT SPECIALIST TO SET UP THE FUNCTIONS IN THIS SECTION.
Network > Network
yOU MUST HAVE HIGH SPEED INTERNET, A ROUTER AND AN ETHERNET CABLE (SOLD SEPARATELy).
yOU MAy NEED TO CONTACT yOUR ROUTER'S MANUFACTURER OR INTERNET SERVICE PROVIDER.

Connect DVR to Network

Use the chart below to record the information you will need in the following instructions.
Static IP Address or DDNS Host Name (External)
IP(v4) Address (Internal)
Subnet Mask
Default Gateway or Router
Figure AK
1. Set up user name and password according
to Password Settings on page 15.
2. Connect DVR to Router via Ethernet
Cable (sold separately).
Note: If you are not familiar with your
router, contact your Router's Manufacturer
or Internet Service Provider.
Page 28
For technical questions, please call your Internet Service Provider.
Figure AJ
3. Find out if you have a Static or
Dynamic external IP Address.
a. If Static, get external IP address (It can
usually be found on the router's WAN
settings page, but your router may differ),
fill in the chart, then go to step 4.
b. If Dynamic, set up DDNS Service.
Set up DDNS
• Go to Network > DDNS
• DDNS: Set to Enable.
• Server: Sign up online with one of the
services on the drop-down list.
• Follow instructions on DDNS service's
website to finish setup.
• Click DDNS Test button to check the connection.
• Fill in the chart with DDNS Host Name.
Changes will be saved when you
Changes will not be saved if you click
Exit or right click on screen.
Click Default to restore default settings.
click Apply then OK.
Item 62463