Default Settings - Bunker Hill Security 62463 Owner's Manual & Safety Instructions

Default Settings

After Date and Time are set, the DVR will automatically perform the following functions.
Default Settings (after setting Date and Time)
Menus • Will time out after 1 minute
Notification • Will beep when camera is unplugged
Password • Off
• Date and recording time will be visible on recordings
Recording • All Channels with a camera hooked up will record 24/7
• Red HDD light on front panel flashes
Motion Detection • Off
• 16:9 Wide Screen aspect ratio
• WD1 Resolution (960 x 480)
Video
• 11 Frames per Second (FPS)
• 768 Bitrate
Pop-Up Menu
To access Pop-Up Menu, right-click anywhere on screen or hover over bottom of screen.
*Controls for PTZ mode are italicized. PTZ is optional Pan/Tilt/Zoom camera (sold separately).
Main Menu Main Menu
4-way Split Screen Display Up To 4 Live Images
8-way Split Screen Display Up To 8 Live Images
PTZ Go To PTZ Controls*
Start Cruise
Start PTZ Program*
Zoom Click and drag to zoom
Record Search Go To Record Search
IMPORTANT: If Mouse, Remote, and DVR buttons won't work,
press and hold REW button on front of DVR until unit beeps.
Page 12
4-way
Split
Screen
PTZ
Main
9-way
Menu
Split
Screen
Figure G
For technical questions, please call 1-888-866-5797.
Record/
Stop PIP
Zoom Record x1
Start
Start Record
SEQ
PTZ Search
Cruise
Record/Stop Record
Start SEQ/Stop SEQ
(Sequence)
PIPx1
Mute
To Change Default Settings
• Go to page 14
• Go to page 14
• Go to page 15
• Go to page 15
• Go to page 16
• Cannot change
• Go to page 16
• Go to page 17
Mute
Start Recording/
Stop Recording
Rotate Through Live
Images/Stop Rotation
Picture in Picture
(if audio hooked up)
Item 62463