Basic Settings; Date, Time, Language, And Menu Settings - Bunker Hill Security 62463 Owner's Manual & Safety Instructions

Basic Settings

Date, Time, Language, and Menu Settings

System > General
Figure H
1. Date and Time:
a. Date: Enter current date.
b. Time: Enter current time.
c. Date Format: 24Hour is selected by
default. Change to 12Hour if desired.
d. Time Format: MM/DD/yy is selected by
default. Change to other format if desired.
e. Click Apply then OK to save
date and time settings.
2. DST (Daylight Saving Time) Setup:
a. Click Setup.
Figure I
Advanced > Events - Notifications
Note: By default, all events will trigger
on screen messages, email being sent
(if email is set up) and beeping sound.
Page 14
NTSC
Disk Full
For technical questions, please call 1-888-866-5797.
b. Daylight Saving Time: Disable is selected
by default. Change to Enable to manually
enter when time change will happen.
c. Time Offset: 1Hour is selected by
default. Change to 2Hour if necessary.
d. Daylight Saving Time Mode:
Week: Set month, week, day of week
and time for change to occur.
Date: Set date and time for change to occur.
3. NTP (Network Time Protocol) Setup:
The DVR must be connected to your Network for
this feature to work.
(Go to Time Settings on page 22)
4. Language: English is selected by
default. Change if desired.
• System needs to restart before Language
changes will apply. Click Apply and OK,
then Exit. Right click on screen and
DVR will prompt restart. Click OK.
5. Video Format: Default is NTSC,
which is the standard in the United
States. LEAVE IT SET TO NTSC.
6. Menu Time Out: Select how long menus will
display or set to OFF so menus will always display.
Changes will be saved when you
click Apply then OK.
Changes will not be saved if you click
Exit or right click on screen.
Click Default to restore default settings.
Note: To set up email, the DVR must be connected
Network > Email - Set
to your Network. (Go to
up Email Notifications on page 34
1. Event Type: Choose Disc Full,
Disc Error, or Video Loss.
2. Change settings if desired.
Changes will be saved when you
click Apply then OK.
Changes will not be saved if you click
Exit or right click on screen.
Click Default to restore default settings.
)
Item 62463