Maintain Hard Drive; Format Hard Drive And Usb Flash Drive; Format Hard Drive/Usb Flash Drive - Bunker Hill Security 62463 Owner's Manual & Safety Instructions

Maintain Hard Drive

Advanced > Maintain - Set up Reboot Cycle, Update Software &
Firmware, Restore Default Settings, Reboot And Shut Down
Figure y
1. Default User:
a. OFF is selected by default so that any
user can access this function.
b. Select Admin so that only the main
user can access this function.
2. Auto Reboot: Enable is selected by default.
3. Reboot: By default DVR will Reboot every
Sunday at midnight. To change:
a. Select when to Auto Reboot.
• Everyday
• Every Week
• Every Month
b. Enter time according to which time format you are
using. For example, to auto reboot at 9:00 PM:
• 24 Hour = 21:00
• 12 Hour = 09:00 PM

Format Hard Drive and USB Flash Drive

Device > HDD
Figure Z
No. ID number of drives
OK - Hard drive installed
State
No HDD - No hard drive installed
Free/total Free Space/Total Space
Free Time Recording time available
Figure AA
Page 20
OFF
Load Settings Save Settings
For technical questions, please call 1-888-866-5797.
4. Update: For updating firmware using a
USB flash drive. (Find the most recent
firmware updates at harborfreight.com.)
5. Load Default:
a. Click to restore system default settings.
b. Check the settings to restore,
click APPLy then OK.
IMPORTANT! Clicking OK will delete
custom settings you have made.
c. System needs to restart before changes will apply.
Click Apply and OK, then Exit. Right click on
screen and DVR will prompt restart. Click OK.
6. Reboot: Click to manually reboot system.
7. Shut Down: Click to manually shut down system.
Unplug DVR and plug back in to restart.
8. Load Settings: Import settings
using a USB flash drive.
9. Save Settings: Export settings
using a USB flash drive.
Changes will be saved when you click Apply then OK.
Changes will not be saved if you click
Exit or right click on screen.
1. Overwrite: Auto is selected by default.
The Hard Disk Drive will overwrite itself
when full. Change if desired.
2. Format Hard Drive:
a. Click Select box.
b. Click Format HDD.
c. Click OK.
d. When formatting is finished, click OK.
3. Format USB Flash Drive:
a. Install USB flash drive into back of DVR.
b. Click Format USB.
c. Click OK.
d. When formatting is finished, click OK.
Changes will be saved when you click Apply then OK.
Changes will not be saved if you click
Exit or right click on screen.
Item 62463