Motors; Error Codes With Indications And Buzzer - Epson fx-2180 Service Manual

FX-2180 Service Manual

3.2.3 Motors

Table 3-4. Motor Test Point
PF Motor
Motor connector No. CN10

Com-mon Pin No.
Test Pin No 1,2,3,4
Test Method Place one lead on pin 1 and the other
(Set meter to horms. lead on pin 3.
Disconnect the motor from Place one lead on pin 2 and the other
control board after the lead on pin 4.
printer is powered off.)
16.1 Ω ± 10% (per phase, at 25°C)
Meter Reading
CR Motor
Motor connector No. CN11
Com-mon Pin No. 5
Test Pin No 1,2,3,4
Test Method Place one lead on pin 5 and the other
(Same as for the PF lead on each of 4 pins.
Motor)
2.7 Ω ± 10% (per phase, at 25°C)
Meter Reading
Rev. A

3.2.4 Error Codes with Indications and Buzzer

Table 3-5. Error Codes with Indications and Buzzer
Error Paper
Pause
Condition Out
Paper out On On
Paper jam On Blinks
(Paper
ejected in-
completely)

Head hot Blinks

Case open On
Fatal error Blinks Blinks
* : Indicates that the beep sounds for 100ms with an interval of 100ms.
Indicates that the beep sounds for 500ms with an interval of 100ms.
Troubleshooting
Indicators
Tear
Pitch Font
Off/Bin
  
  
  
  
Blinks Blinks Blinks
Buzzer*
× 3
× 3

× 3
× 5
3-3