Timer Recording; Note For Timer Recording & Otr - Sanyo FWDV225F Owner's Manual

Timer Recording

V S VHS V V V VHS VHS V Press first.
1
Press , Use
SETUP
"TIMER PROGRAMMING".
Then, press
2
Use / to select an
empty program number. Then,
press to go to next step.
3
Use / to select "ONCE",
"DAILY" (Mon-Fri), or "WEEKLY".
Then, press to go to next step.
4
Use / to select the
desired month. Then, press
to go to the next step.
Then, repeat procedures above to select the
day, start time, end time, and "L1" or "L2" as
well.
5
Use / to select recording
speed. Then, press
the MENU.
To set another program after step
Then, repeat procedures from steps
5
.
You can program the unit to record up to 8
programs, and up to 1 year in advance.
6
Press to set the timer standby mode.
The [TIMER REC] indicator on this unit lights
up and the unit goes to the DVD mode.
Note:
To go back one step, press [0] during steps
•
5
to .
Select "L1" or "L2" to activate rear input jacks or
•
front input jacks accordingly.
EN
RECORDING
/ to select
to go to next step.
- M E N U - TIMER PROGRAMMING
B TIMER PROGRAMMING
PROG.
SATELLITE LINK
DATE
AUTO REPEAT [OFF]
START TIME
CLOCK SET
END TIME
LANGUAGE SELECT
L1/L2
REC SPEED
Available program
number blinks.
PROGRAM NUMBER 1
DATE
START TIME – – : – –
END TIME – – : – –
L1/L2
REC SPEED – –
PROGRAM NUMBER 1
B
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
START TIME – – : – –
END TIME – – : – –
L1/L2
REC SPEED – –
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
to remove
START TIME 0 7 : 3 0
END TIME 0 8 : 3 0
L1/L2
REC SPEED SP
5
, press
2
To Check, Correct or Cancel a Timer Program
1) Press [TIMER SET], and then press [VCR
the remote control.
2) Repeat procedures in step 1 above.
3) Use [K / L] to select the program number you
want to check. The details of the program you
select will appear on the TV screen.
Use [0 / 1] to go to the digit you want to change.
Then, use [K / L] to enter the correct numbers.
You can cancel the entire program by pressing [0]
12345678
while the program number blinks.
4) Press [CLEAR] to exit.
5) Press [TIMER SET] to return to the timer standby
mode.
To Cancel a Timer Recording in Progress
– – / – –
– –
Press [C A] on the unit.
– –
– –
Note for Timer Recording & OTR
If a power failure occurs or the cassette tape does not
•
ONCE have the erase-protection tab,
DAILY
the [TIMER REC] indicator blinks and timer recording
WEEKLY
cannot be performed.
If there is a power failure occurred or the unit is
•
unplugged for more than 30 seconds, clock setting and
all programmed timer recordings will be lost.
1 0 / 0 2 TUE
– –
If a cassette tape runs out before an OTR or a timer
– –
•
– –
recording is finished, the unit ejects the cassette tape.
After an OTR or a Timer Recording Has
Been Set, This Unit Operates as Follows:
Press [TIMER SET] on the remote control or [C A] on
•
the unit, then press [VCR
function again.
1 0 / 0 2 TUE To cancel the timer standby mode, press [TIMER SET]
•
PM
PM on the remote control or [C A] on the unit, then press
L1
[VCR ] to activate the VCR function again.
B SP
SLP
When an OTR or a Timer Recording is Completed.
.
through
If timer programs are left on the VCR, the unit will
•
switch to the DVD mode and then the VCR will go
standby for the next timer recording. (All the VCR
functions will be unavailable.) If auto power off has
been in effect, however, both DVD and VCR will go to
standby mode.
All the DVD functions are available while the VCR is in
•
OTR, Timer standby, or Timer Recording mode.
The [TIMER REC] indicator blinks if there are no more
•
timer programs.
Press [C A] on this unit or [TIMER SET] on the remote
•
3
control to use the VCR when the unit is turned off.
To Use the DVD Player During Timer
Recording or While the [TIMER REC]
Indicator is On or Blinking.
Press [POWER y] to turn On the unit. Press [DVD
•
on the Remote Control to choose DVD mode. Then
continue with the other DVD features as described in
this manual.
] on
] to activate the VCR
]
21