Accessories; Optional Equipment (Field Installed - Lincoln Electric PIPELINER 200G Operator's Manual

C-1
OPTIONAL EQUIPMENT
(K704) Accessory Set
Includes 35 ft (10.7m) electrode and 30 ft (9.1m) work
cables, headshield, work clamp, and electrode holder.
WARNING
Pipe Thawing with an arc welder can cause fire,
explosion, damage to electric wiring or to the arc
welder if done improperly. The use of an arc
welder for pipe thawing is not approved by the
CSA, nor is it recommended or supported by
Lincoln Electric.
------------------------------------------------------------------------
(K924-4) REMOTE CONTROL
For machines having Code Number 10660:
For "Stick" operation which contains switch, remote
control rheostat and 100 ft (30.5m) or 25 ft (7.6m)
cable. Easy Installation.
(K924-5) REMOTE CONTROL
For machines having Code Number 10913:
For "Stick" operation containing remote control rheo-
stat and 100 ft (30.5m) cable. Easy Installation.
REMOTE CONTROL (K2464-1) - Contains
remote control rheostst (for adjusting the CC
"STICK" OCV), remote control potentiometer
(for adjusting the CV "WIRE" OCV), and 100
ft. (30.5m) cable. Easy Installation>

ACCESSORIES

(K953-1) TRAILER
(FIELD INSTALLED)
optional fender and light package. For highway use,
consult applicable federal, state, and local laws
regarding possible additional requirements. There is a
choice of 2 hitches, a fender & a light package. Order:
K953-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-1 Fender & Light Kit
K965-1 Cable Rack
(K623-1) WIRE FEED MODULE
stant voltage (CV) output with improved arc stability
for Innershield welding. Also, excellent for MIG weld-
ing. Easy Installation. Recommended wire feeder is
the LN-25.
(K2261-1) OIL DRAIN KIT-
hose and clamp.
PIPELINER 200G
C-1
- Two-wheeled trailer with
-Provides con-
Includes ball valve,