Light Bulb Replacement; Shelves - GE 10 Series Owner's Manual

Light Bulb Replacement

The light bulb is located at the top of the
fresh food compartment just behind the
temperature control.
To replace the bulb:
Unplug the refrigerator.
Unscrew the bulb and replace with
a same-size, same-type bulb.
Plug the refrigerator back in.
CAUTION: Setting the fresh food control
to OFF does not remove power to the
light circuit.
Beneath the Refrigerator
• In the refrigeration process, it is
normal that heat be expelled in the
area under the refrigerator. Some
synthetic floor coverings will discolor
at these normal and safe operating
temperatures. Your floor covering
supplier should be consulted if you
object to this discoloration.
When You Go on Vacation
For extended vacations or absences,
remove food and unplug the refrigerator.
Clean the interior with a baking soda
solution of one tablespoon of soda to
one quart of water. Leave doors open.
When You Move
Secure all loose items such as shelves,
storage drawers and ice trays by taping
them securely in place to prevent
damage, and raise the leveling legs.
GEAppliances.com
• Care should be taken in moving your
refrigerator away from the wall.
All types of floor coverings can be
damaged, particularly cushioned
coverings and those with embossed
surfaces.
• When pushing the refrigerator back,
make sure you don't roll over the
power cord.
For shorter vacations, remove perishable
foods and leave the control at your
regular setting. However, if room
temperature is expected to drop below
60°F, follow the same instructions as
for extended vacations.
Be sure refrigerator stays in upright
position during moving. Protect outside
of refrigerator with blanket.
7