Behind Refrigerator; Condenser; Defrost Water Pan; Light Bulb Replacement - GE TDX9 Use And Care Manual

Drain Opening in Fresh Food Compartment
To remove ice from the cooling plate
turn the control to a lower number.
During yearly cleaning, flush a
solution of baking soda (one
teaspoon) and two cups of hot (not
boiling) water through the drain line
with the help of a meat baster. This
will help eliminate odor and reduce
the likelihood of a clogged drain.

Condenser

For most efficient
Condenser
operation, the condenser,
located on the back of
the refrigerator, should
Defrost
be cleaned at least once Water Pan
a year. Pull the
refrigerator away from
the wall and use a non-
metallic brush or a vacuum cleaner attachment
to remove any accumulated dust.

Light Bulb Replacement

A light bulb and socket are located next to the temperature control. To replace
the bulb, first unplug the refrigerator. Next, remove the light by pressing
back on the cover then pulling it out. Replacement bulb (Cat. No.
WR23X5173) is available from GE Appliance Service and Parts Centers.

Behind Refrigerator

Care should be taken in moving your refrigerator away
from the wall. All types of floor coverings can be
damaged, particularly cushioned coverings and those
with embossed surfaces. When pushing the refrigerator
back make sure you don't roll over the power cord.
Cooling
Plate
Drain
Hole

Defrost Water Pan

The pan located below the condenser should be cleaned
at least once a year. DO NOT REMOVE THE PAN.
Move the refrigerator out from the wall as far as
necessary, and unplug the power cord from the wall
outlet before cleaning the pan. Use a clean cloth or
sponge dampened in warm water and baking soda
solution—one tablespoon of baking soda to a quart of
water. Do not use cleansing powders, abrasive
cleaners, bleach or cleaners containing chlorides.
Press Back
Pull Out
7