To Switch On And Off; Standby Mode; Operation In Idle - FLY DS400 User Manual

Table of Contents

Advertisement

Tips:
The battery icon
Please charge the battery following the steps above.
Please charge the battery before you use the newly bought phone. We suggest you
charge the battery for 4 hours continuously for the first time.
Charging when the phone is in the ON mode will not influence the normal dialing and
answering, but this needs to consume power, thus the time of charging will increase.
We suggest you recharge the battery when the power is used up so as to prolong the life
of the battery.
T
o
s
w
i
t
c
h
o
n
a
T
o
s
w
i
t
c
h
o
n
a
To switch on: Long press End key when the phone is in the OFF mode.
If the phone lock has been activated, you need to input the 4-digit password to unlock.
(The preset unlock code is 0000.)
If the SIM card has been inserted in the phone, and the related PIN code protection is
activated, you need to input the 4-8 passwords to unlock.
Warning: If you input three wrong PIN codes in a row, the SIM card will be locked and you
need to input the PUK code to unlock. Both the PIN code and PUK code are provided by
the network operator.
To switch off: In idle, long press End key.
S
t
a
n
d
b
y
M
o
d
e
S
t
a
n
d
b
y
M
o
d
e
Menu > Settings > Standby Mode
There are three standby modes:
Master /Slave: Both SIM cards can receive incoming calls or messages. Use Send
key (1) to dial a phone number or send a message from the network of Master SIM. If
you press Send key (2), the call or the message will be send through the network of
Slave SIM.
Master: To make/answer calls and receive/send messages through the network of
Master SIM. Both send keys are available for making call and sending message.
Slave: To make/answer calls and receive/send messages through the network of
Slave SIM. Both send keys are available for making call and sending message.
O
p
e
r
a
t
i
o
n
i
n
i
d
O
p
e
r
a
t
i
o
n
i
n
i
d
The so-called "idle mode" refers to the standard mode where the phone has been
normally switched on and logged in the network, but no calls are in process or no menu is
used.
In idle:
Menu > Main Menu
Name > Quick Search
Press the Navigation key to enter the corresponding functions.
Press Send key to call out the list of dialed numbers.
Press Menu key and * key to lock/unlock the keypad.
Version 1.0
User manual
displayed on the screen indicates that the battery power is low.
n
d
o
f
f
n
d
o
f
f
l
e
l
e
Page 18 of 59
08/07/28

Advertisement

Table of Contents
loading

Table of Contents