Answerer Indicator; Screening Calls From The Handset; Memory Full - GE 26998 User Manual

After you access the answering system, use the marked handset keys just
as if you were pressing the corresponding buttons on the base (see
"Answering System Operation" for details on functions). To make it easy
for you, the functions are listed on the handset above each number. For
example, to play messages:
1. Press the format/answerer button.
2. Press the 2 button (play/stop.)
3. When you are finished listening to your messages, press format/
answerer again.
A I
NSWERER NDICATOR
The remote answering system is active when ANSWERER REMOTE is
displayed on the handset.
S C
CREENING ALLS FROM THE
When the phone rings:
1. Press the format/answerer button to access the answering system. The
display shows CALL SCREENING.
2. Listen as the caller leaves a message.
3. Press the TALK/CALLBACK button to speak to the caller or press
answerer to stop screening the call.
M F
EMORY ULL
When the memory is full, the system answers after 10 rings, beeps, and
waits for the caller to enter the 3-digit security code. If a security code is not
entered within 10 seconds after the unit beeps, the phone hangs up.
You need to erase some of the messages so the system can record new
messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access
the answering system, enter your 3-digit security code after you hear the beep.
22
H
ANDSET