Advertisement
Step four – Curved brackets
Attach the curved brackets to the inside of the welded tabs on the seat frame.
» You will want to take the larger bolts out of the bag and set them aside(these are
extras and will not be used on the chair, use the two smaller bolts in the hardware bag
to attach each curved bracket to the chair.
» The bolts which are bagged separately will be used to attach the curved bracket to the
base frame.
Insert the bolts from the outside of the seat frame (use one flat washer, one
nordlock washer, and one nut for each bolt.
» Use a 10MM wrench and a 4MM allen wrench to tighten the bolts in place.
These will be
used instead
Advertisement
