Heatsource (If Applicable) - Carrier Infinity SYSTXCCITN01-A Owner's Manual

Touch the upload photo icon on the menu screen on the Infinity Touch
S
Control.
Place the USB drive into the USB port on the bottom of the Infinity
S
Touch Control when prompted.
The control will automatically upload the photo.
S
Once complete, you will receive a confirmation that your photo is
S
loaded.

HEATSOURCE (IF APPLICABLE)

With the Infinity Touch Control, you can select the desired heat source of your
system, if your system is equipped as a HYBRID HEATR System. Select the
HEATSOURCE icon from the menu screen.
NOTE: Options available on this screen will correspond to the equipment attached.
Options may appear that are different than those shown, below.
The default is for the system to control the heat source.
S
To have only the furnace control, select FURNACE ONLY.
S
To have only the heat pump, select HEAT PUMP ONLY.
S
When you have made the appropriate selection, touch SAVE.
S
42
A12155