Section 3 - Configuration
If you selected Add New IP Filter:
Add IP Filter
Policy
Select whether the filter will Drop or Accept the
source IP address.
Protocol
Select the protocol for ports that you want to allow or
deny access to. Choose between TCP, UDP or ICMP
or all of the above.
Enter a single port or a range of ports that you wish
Source IP
to apply the changes to. Separate port numbers with
a comma.
Enter a two digit subnet number.
Subnet
Click the toggle if you wish to enter a range of port
Source Port Number
numbers to allow or deny access to.
Type in the destination IP address.
Dest IP
Enter a two digit subnet number.
Subnet
Click the toggle if you wish to enter a range of port
Destination Port
numbers to allow or deny access to.
Number
D-Link DWR-932 User Manual
49