12.2. Detaching the drain pump
12.3. Detaching the control board
CS-ME7EB1E / CS-ME10EB1E / CS-ME12EB1E / CS-ME14EB1E
8)
Detach the air guide and unscrew the screw on the heat
exchanger.
9)
Detach the float switch and unscrew the 3 screws and
disengage the 2 catches on the fan motor holder.
10) Loosen the screw fixing the shaft between the cross flow fan
and the fan motor and detach the fan motor.
11) Remove the cross flow fan.
8) Unscrew the screw on the drain pump holder and detach it.
9) Detach the drain hose from the drain pump and remove the
drain pump.
1) Open the air inlet section of the front grille.
2) Unscrew the 4 screws on the front grille, then disengage the
catches with a screwdriver and detach the front grille.
37