Sony HDVF-EL30 Operation Manual page 20

Page Menu
PEAKING
03
04 PEAKING PLUS
20
Using the Menu
Item Settings
(default in [
FREQUENCY L/[M]/MH/H
RANGE 1/[2]/3/4
COLOR [OFF]/ON
PEAKING
COLOR [BLUE]/RED/
YELLOW/
GREEN/ORIG
CHROMA –99 to [0] to 99
PEAKING MODE [STD]/PLUS
COLOR/AREA [COLOR]/AREA/
SEL BOTH
[CENTER]/
POSITION
UPPER/RIGHT/
LOWER/LEFT
COLOR DETECT EXEC
HUE PHASE [0] to 359
HUE WIDTH 1 to [45] to 360
SAT WIDTH –99 to [0] to 99
Function
])
Set the center frequency of edge enhancement signals.
Set the variable range of the level of edge enhancement
signals.
The edge enhancement signals are displayed converted to
the color.
OFF: Enhance the edge in white.
ON: Enhance the edge in the color specified in "COLOR."
When "ON" is set in "COLOR PEAKING," select the color of
the edge enhance signals.
BLUE: Enhance the edge in blue.
RED: Enhance the edge in red.
YELLOW: Enhance the edge in yellow.
GREEN: Enhance the edge in green.
ORIG: Displays in monochrome and enhances the edge
in the original color.
Set the chroma level. (This does not affect to the camera's
outputting level.)
The smaller the number, the less the amount of chroma.
The setting is linked to the "CHROMA" setting of the
FUNCTION menu.
For selecting a peaking mode.
STD: Standard mode
PLUS: PEAKING PLUS mode
For selecting a PEAKING PLUS mode.
COLOR: Sharpens the edges for the selected color only.
AREA: Sharpens the edges for the selected area only.
BOTH: Sharpens the edges for the selected color and
area only.
For selecting the effective PEAKING area when "AREA" or
"BOTH" is selected in "COLOR/AREA SEL."
The setting is linked to the "MAG POSITION" setting of the
MAGNIFICATION menu.
CENTER: Sharpens the edges of the center area.
UPPER: Sharpens the edges of the upper area.
RIGHT: Sharpens the edges of the right area.
LOWER: Sharpens the edges of the lower area.
LEFT: Sharpens the edges of the left area.
For detecting the color of which its edges are to be
enhanced.
This feature is enabled only when "COLOR" or "BOTH" is
selected in "COLOR/AREA SEL."
For specifying the hue center position of which edge
enhancement is to be performed.
For specifying the hue range of which edge enhancement is
to be performed.
For specifying the saturation range of which edge
enhancement is to be performed.