5.1 Home Theatre Connections - Q Acoustics 1000i User Manual

5.1 Home Theatre Connections

CENTRE
AV AMPLIFIER
RIGHT FRONT
RIGHT LEFT
REAR LS
RIGHT SURROUND
RIGHT LEFT
SUB
OUT
FRONT LS
CENTRE
LEFT SURROUND
Home Theatre Connections
The Front Speakers are bi-wired. This is the
preferred mode of connection provided the
crossover network supports bi-wiring.
The Centre and Surround channel speakers
are conventionally wired.
6.1 and 7.1 connections are the same as 5.1
connections with the addition of the extra
effects channel/s.
When running loudspeaker cables be
especially careful not to run them across open
LEFT FRONT
floor areas where they could be a source of
SUBWOOFER
danger. Run loudspeaker cables around room
boundaries whenever possible.
Line level signal cables should be run apart
from mains cables. Never run line level signal
cables parallel to power cables especially on
long runs.
If the subwoofer is triggered on by appliances
switching on and off, re-route the input signal
cable before taking further measures.