Stereo Connections - Q Acoustics 2000i serues User Manual And Product Specifications

Connecting Passive Loudspeakers

Stereo Connections

Standard Connections
Connect the RED (+) terminal of the RIGHT loudspeaker to the RED,
Positive (+) terminal on the RIGHT channel of the amplifier. Connect the
BLACK (–) terminal of the loudspeaker to the matching BLACK,
Negative (–) terminal of the amplifier.
Repeat this procedure for the LEFT channel.
In the case of the 2020i and 2050i you may use any convenient
Positive(+) or Negative (–) terminal. Refer to the illustration below.
Standard Wiring: 2020i and 2050i
RIGHT SPEAKER
RIGHT
SPEAKER
LEFT
AMPLIFIER
SPEAKER
LEFT SPEAKER
Connecting the 2010i and 2000Ci
RIGHT
SPEAKER
RIGHT SPEAKER
Bi-Wiring
Directly connecting the treble and bass networks of a loudspeaker to an
amplifier improves both bass performance and dynamic range.
To bi-wire: Prepare two twin cables for each loudspeaker. Unscrew all
the loudspeaker terminals and remove both links. Now connect the
treble terminals and the bass terminals to the amplifier following the
procedure described in Standard Wiring. Refer to the illustration below.
Bi-Wiring: 2020i and 2050i
RIGHT SPEAKER
RIGHT
SPEAKER
When your speakers are connected: Switch on the system and play
some music at moderate level. Fine tune the speaker placement to suit.
LEFT
AMPLIFIER
SPEAKER
LEFT SPEAKER
LEFT SPEAKER
LEFT
SPEAKER
AMPLIFIER