Table of Contents
Advertisement
P u s h t o t a l k
• To set the PTT settings for use, select
• To set the required settings for the PTT connection, select
settings.
• To open the browser and to connect to the PTT network portal
provided by the service provider, select Web.
■ Connect to and disconnect PTT
To connect to the PTT service, select
on.
indicates the PTT connection.
temporarily unavailable. The phone automatically tries to reconnect to
the service until you disconnect from the PTT service. If you have added
groups to the phone, you are automatically joined to the active
or Listened) groups, and the name of the default group is displayed in
the standby mode.
To disconnect from the PTT service, select
■ Make and receive a PTT call
Set the phone to use the loudspeaker or earpiece for PTT
communication.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
When connected to the PTT service, you can make or receive dial out
calls, group calls or one-to-one calls. One-to-one calls are calls you
make to only one person.
Make a dial out PTT call
For a dial-out PTT call you can select multiple PTT contacts from the
contact list. The recipients get an incoming call and need to accept the
call in order to participate. A dial out call creates a temporary group and
the participants join this group only for the duration of the call. After
the call the temporary dial out group is deleted.
Select
Menu
>
Push to talk
contacts for the dial-out call.
64
PTT
settings.
Menu
>
Push to talk
indicates that the service is
Switch PTT
>
Contacts list
and mark the desired
Config.
>
Switch PTT
(Default
off.
Advertisement
Table of Contents
