Connect To And Disconnect Ptt; Make And Receive A Ptt Call; Make A Dial-Out Ptt Call - Nokia 5070 User Manual

■ Connect to and
disconnect PTT
To connect to the PTT service, select
Menu > Push to talk
indicates the PTT connection.
indicates that the service is
temporarily unavailable. The phone
automatically tries to reconnect to the
service until you disconnect from the
PTT service. If you have added channels
to the phone, you are automatically
joined to the active (Default
Listened) channels, and the name of
the default channel is displayed in the
standby mode.
To disconnect from the PTT service,
select Switch PTT off.
■ Make and receive a
PTT call
Select Menu > Settings
Push to talk settings
to use the loudspeaker or headset for
PTT communication.
Warning: Do not hold the
device near your ear when
the loudspeaker is in use,
because the volume may be
extremely loud.
When connected to the PTT service,
you can make or receive dial-out calls,
channel calls, or one-to-one calls.
One-to-one calls are calls you make to
only one person.
Copyright © 2007 Nokia. All rights reserved.
> Switch PTT on.
or
> Tones >
to set the phone

Make a dial-out PTT call

For a dial-out PTT call you can select
multiple PTT contacts from the contact
list. The recipients get an incoming call
and need to accept the call in order to
participate. A dial-out call creates a
temporary channel, and the
participants join this channel only for
the duration of the call. After the call,
the temporary dial-out channel is
deleted.
Select Menu > Push to talk
list, and mark the desired contacts for
the dial-out call.
The icon behind the contact in the list
denotes current login status:
, or indicate that the person
is available, unavailable, or unknown;
indicates that the login status is
not available. The login status is only
available for subscribed contacts.
To change the subscribed contacts,
select Options and from the available
contact list options Subscribe contact
or Unsubscr. contact; or if one or more
contacts are already marked,
marked or Unsubscr.
Press and hold the volume up (PTT) key
briefly to start the dial-out call.
The marked contacts are called by the
PTT service, and the joining contacts
are shown on the display. Press and
hold the volume up (PTT) key again to
talk to the joined contacts. Release the
P u s h t o t a l k
> Contacts
,
Subscribe
marked.
57