Call - Nokia 5140i User Manual

S e t t i n g s
To define the settings for connections from the PC, select
Settings > Connectivity
access point, activate the access point you want to use, and select
active access point. Select
for the currently selected access point. Select
and enter the access point name (APN) to establish a connection to an
EGPRS network.
You can also set the dial-up service settings (access point name) on your
PC using the Nokia Modem Options software. See PC Suite p. 90. If you
have set the settings both on the PC and on your phone, the PC settings
are used.

■ Call

Select Menu > Settings
Automatic volume control
the speaker volume according to the background noise
Call divert (network service) — to divert your incoming calls. You may
not be able to divert your call, if some call barring functions are active.
See Call barring service
Anykey answer > On
except the end key and the left and right selection keys.
Automatic redial >
attempts to connect the call after an unsuccessful call attempt
Speed dialling > On
see Speed dials p. 47. To dial, press and hold the corresponding number
key.
Call waiting > Activate
incoming call while you have a call in progress (network service). See
Call waiting p. 21.
Summary after call
and cost (network service) of the call after each call
Send my caller ID (network service) > Yes, No, or
54
> Packet data
Alias for access
> Call and from the following options:
— to set the phone to automatically adjust
in Security p. 57.
— to answer an incoming call, briefly press any key,
On — to set your phone to make a maximum of 10
— to activate speed dialling. To set up speed dialling,
— to set the network to notify you of an
> On — to briefly display the approximate duration
> Packet data settings
point, and enter a nick name
Packet data access
Set by network
Menu >
> Active
Edit
point,