Using the SmartCam application
Orienting the rear view camera
1. Launch the SmartCam application.
2. Press , then select
> The calibration menu appears.
3. Follow the instructions on the screen.
Choosing a view
1. Launch the SmartCam application.
2. Touch the left part of the screen to select one of the four views available:
Face (default view)
Wide
Note : You can choose a view by sliding your finger on the screen: on the top of the screen
for Overhead view or on the sides for Sides view.
Settings
1. Press
> Settings.
2. The settings menu appears.
3. Tick or untick the boxes to activate or inactivate the settings.
Note: The parking lines correspond to three zones: close (red), intermediary (orange) and
far (green).
Calibration.
Sides
Overhead
Rear view camera
43