Internet; Connection With A Usb Modem - Parrot Asteroid Smart User Manual

Internet

Warning: Internet connection via a USB Modem requires a subscription offer with a
telephone operator. Using this service can result in significant roaming charges. Check the
conditions of your subscription and consumption tracking with your operator. Parrot cannot
be held responsible for any associated costs

Connection with a USB Modem

Note: Refer to the compatibility section of the Parrot ASTEROID Smart on our website to
get the list of USB Modems compatible with the Parrot ASTEROID Smart.
Note : To guarantee an optimal reception quality we recommend you do not connect your
internet USB Modem on the Parrot ASTEROID directly : use the USB cable to install your
device on the dashboard (or any other open area).
1. Connect a USB Modem to the Parrot ASTEROID Smart with a USB cable.
> A pop-up will appear.
2. Enter your PIN code (if required) then tap ENTER. Check the
not want to enter the PIN code each time you use the Parrot ASTEROID Smart with this
USB Modem.
Note: You will be able to change this setting by selecting Settings > Wireless & networks >
Mobile networks settings. Among the mobile access devices, select your USB Modem, tap
Forget PIN code > Forget.
3. If necessary, select your APN (Access Point Name) from the suggested list. This
information is available in the documentation provided with your USB Modem. If your
APN is not in the list, you can add it by selecting
Mobile networks settings.
4. Among the mobile access devices, select your USB Modem.
5. Select Access point > Other > Preset access
6. Wait for approximately 30 seconds until the connection is established. You can also
press the button and browse the menus while the connection is being established.
Memorise
Settings > Wireless & networks >
points.
option if you do
Internet 31