Audio Player Connected Via Bluetooth; Analogue Audio Player; Radio - Parrot Asteroid Smart User Manual

Audio player connected via Bluetooth

Note : The Parrot ASTEROID Smart allows you to use the telephone and audio streaming
functions from 2 different phones without having to disconnect one of them.
You can use the Parrot ASTEROID Smart to listen to songs stored on your mobile phone or
Bluetooth audio device. To do so, your phone / audio device must support the Bluetooth
A2DP profile (Advanced Audio Distribution Profile).
If you are using a Bluetooth audio player for the first time, you have to pair both devices.
If both devices are already paired:
1. Tap Music > Bluetooth
2. Start playing a song on your audio player.
Note: If your Bluetooth audio player supports the AVRCP 1.4 profile, you can browse
through the playlist saved to the memory.

Analogue audio player

Use a Jack / Jack cable to connect an analogue audio player (ex CD player) to the Parrot
ASTEROID Smart.
1. Connect the audio player using the Jack connector.
2. Press the button until the
3. Start playing a song on your audio player.
Note : Press the button to mute / unmute the Parrot ASTEROID Smart.

Radio

To open the radio, press
Note : The default frequency is the one you last listened to.
Selecting an operating mode
To select an operating mode :
1. Tap Music.
2. Tap Browse located next to the Tuner.
3. Select a mode among the following: Favourites,
Audio.
Line in source is selected.
Music > Radio.
Full scan, Manual FM and Manual AM.
Music 29