Initialization Of F, E; Initializing The F, E; Modification Of F, E - Sony MVC-FD91 Service Manual

1-2. INITIALIZATION OF F, E PAGE DATA
1. Initializing the F, E Page Data
Note: If the F, E page data is initialized, all adjustments must be performed
again.
Adjusting page F
Adjusting Address 00 to FF
Adjusting page E
Adjusting Address 00 to FF
Initializing Method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 3, address: 00, and set data: 2D.
3) Select page: 3, address: 01, set data: 2D, and press the PAUSE
button of the adjustment remote commander.
4) Select page: 3, address: 00, and check that the data is "00".
5) Perform "Modification of F, E Page Data".
2. Modification of F, E Page Data
If the F, E Page data has been initialized, change the data of the
"Fixed data-2" address shown in the following tables by manual
input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note :If copy the data built in the different model, the camcorder may
not operate.
3) When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of F, E Page data
1) Select page: 3, address: 00, and set data: 29.
2) Select page: 3, address: 01, and set data: 29, and press the
PAUSE button of the adjustment remote commander.
3) Perform all adjustments.
3. F Page Table
Note: Fixed data-1 : Initialized data. (Refer to "1. Initializing the F, E
Page Data".)
Fixed data-2 : Modified data. (Refer to "2. Modification of F, E
Page Data".)
Address
Initial value
00 to 0F
10 00 Test mode
11 Fixed data-1
12 Fixed data-2
13 Fixed data-1
14 (Initialized data)
15
16
17
18 80 Battery end adj.
19 88
1A AD
1B C2
1C CD
Remark
5-5
Address
Initial value
1D Fixed data-1
1E (Initialized data)
1F
20 Fixed data-2
21
22
23
24 Fixed data-1
25 (Initialized data)
26 Fixed data-2
27
28
29
2A Fixed data-1
2B (Initialized data)
2C Fixed data-2
2D
2E
2F Fixed data-1
30 BB Bright adj. (LCD)
31 6F Color adj. (LCD)
32 77 White balance adj. (LCD)
33 7A
34 DB Contrast adj. (LCD)
35 6F VCO adj. (LCD)
36 97 V-COM adj. (LCD)
37 78 D range adj. (LCD)
38 7C V-COM level adj. (LCD)
39 Fixed data-1
3A (Initialized data)
3B Fixed data-2
3C Fixed data-1
3D (Initialized data)
3E Fixed data-2
3F Fixed data-1
40 (Initialized data)
41 Fixed data-2
42 Fixed data-1
43 (Initialized data)
44
45
46 Fixed data-2
47 Fixed data-1
48 (Initialized data)
49
4A
4B
4C
4D
4E
4F
50
51 Fixed data-2
52 Fixed data-1
53 (Initialized data)
54
Remark