Sharp LC-20S2U-S Service Manual page 37

5. On Setting Items
* "EZ-SETUP" discussed below indicates "EZ-SETUP after the first power-on".
(1) MAXIMUM VOLUME
Selection Adjustable from 1 to 60 (no loop)
Default 60
Function The volume control is limited to an adjusted level (for the main speakers and headphones).
Exception » The VOLUME setting can be freely adjusted to a desired level in the adjustment process mode.
Remarks » The volume can be preset from -60 to 0 in the line output regardless of the adjusted setting.
If the setting is below 59, the number alone is displayed. The volume bar does not appear.
»
(2) VOLUME FIXED
Selection Selection between "VARIABLE" and "FIXED" (loop provided)
Default VARIABLE
Function "FIXED" setting:
1 The volume control is fixed at a level, not adjustable (for the main speakers and headphones).
Exception The VOLUME setting can be freely adjusted to a desired level in the adjustment process mode.
»
Keys » Volume up/down (VOL+/-) [on remote controller and set]
inoperative » Mute (MUTE)
except for
default setting
Remarks » The volume setting becomes 1 just after the selection of "NO (VARIABLE").
» The volume can be preset from -60 to 0 in the line output regardless of this setting.
Priority is given to the volume fixed over the maximum volume.
»
(3) REMOTE CONTROL
Selection Selection between "RESPOND", "LIMITED" and "NO RESPOND" (loop provided)
Default RESPOND
Function Setting the remote control functions
1 "NO RESPOND" setting: The remote control keys are inoperative in the usual way.
2 "LIMITED" setting: All the remote control keys other than power, channel up/down, volume up/down and
brightness are inoperative.
Exception The adjustment process, factory setting, inspection process and public mode keys are operative regardless
»
of this setting.
» The remote control is operative all the time on the adjustment process, inspection process and public mode
setting screens as well as during EZ-SETUP regardless of this setting.
(4) USER CONTROL
Selection Selection between "RESPOND" and "NO RESPOND" (loop provided)
Default Default
Function Disabling the set's keys other than POWER
Exception The user control is operative at a start of inspection process, public mode and public password regardless of
»
this setting. (Note)
» The user control is operative all the time on the adjustment process, inspection process and public mode
setting screens as well as during EZ-SETUP regardless of this setting.
Note:
Inspection process start ... Press "MENU" and "INPUT SELECT" at once and turn on the power.
Public mode start .............. With the adjustment process hotel mode on, press "CH UP" and "VOL+" at once and turn
Public password start ..... Press "MENU" and "VOL+" at once and turn on the power.
on the power.
37
LC-20S2U-S