Sharp LC-20S2U-S Service Manual page 36

LC-20S2U-S
2. How to exit Public Mode
There are the following ways to quit the public mode setup screen.
» Turn off "PUBLIC MODE" in the adjustment process mode. ( ) ← This way alone is not for quitting the setup
» Turn off the power with the power key. ( )
» Select "EXECUTE". ( )
» Move the cursor to "RESET" and press the "FLASHBACK" key. (Back to the normal mode screen)( )
... "PUBLIC MODE" stays on in the adjustment process mode.
... The settings will be back to the factory ones.
3. Public Mode Setting Values
» With the factory settings made, the public mode settings get initialized. (The adjustment process remains intact.)
4. Public Mode Menu
The guidance is not displayed onscreen.
Setup procedure
» To move the "CURSOR UP AND DOWN", use the "CURSOR UP/DOWN" key (remote controller) and "CHAN-
NEL UP/DOWN" key (remote controller and set).
» To change the settings, use the "CURSOR RIGHT/LEFT" key (remote controller) and "VOLUME UP/DOWN"
key (remote controller and set).
» To save new settings, keep the cursor at "EXECUTE" and use the "CURSOR RIGHT/LEFT" key (remote control-
ler) and "VOLUME UP/DOWN" key (remote controller and set).
MAXIMUM VOLUME
VOLUME FIXED
REMOTE CONTROL
USER CONTROL
MENU BUTTON
ON SCREEN DISPLAY
START MODE
INPUT MODE FIXED
SOUND ONLY MODE
RESET
ENTER
[ 60 ]
[VARIABLE ]
[RESPOND ]
[RESPOND ]
[RESPOND ]
[YES ]
[NORMAL ]
[VARIABLE ]
[NO ]
(PUBLIC MODE)
36
screen, but for quitting the mode itself.