Sewing Techniques; Three-Step Zigzag Stitch; Buttonholes - Pfaff ambition 1.0 Owner's Manual

Sewing techniques

Three-step zigzag stitch

Make sure the needle pierces the fabric on the left
side and overcasts the edge on the right side.
to allow seams to stretch when sewing knit fabrics.

Buttonholes

for different kinds of fabric and garments. Look
descriptions of each buttonhole.
The fabric should be interfaced and/or stabilized
where buttonholes are to be sewn.
One step Buttonhole Foot 5B
1. Mark the the position of the buttonhole on
your garment.
2. Attach buttonhole foot 5B and pull out the
button holder plate. Insert the button. The
button will determine the length of the
buttonhole.
3. Make sure that the thread is pulled though the
hole in the presser foot and placed under the
foot.
adjust the width and density as desired.
Note: Always sew a test buttonhole on a scrap piece of
fabric.
5. Lower the buttonhole lever all the way down
6. Position your garment under the presser foot
so that the marking on the fabric is aligned
with the center of the buttonhole foot.
7. Hold the end of the upper thread and start
sewing. The buttonholes are sewn from the
front of the presser foot to the back.
8. Once the machine has sewn the buttonhole,
raise the presser foot.
30
A
B