Using the alphabet
Alphabet mode overview
1.
Font selection/font preview
2.
Name of selected font
4.
Keyboard
6.
Delete
Create a text sequence
•
Press the left or right arrow buttons on the
•
Press the up arrow button until the font
•
Press the down arrow button twice to step
to the keyboard. Move around the keyboard
letter will be placed at the cursor position in
Note: The selected letter on the keyboard will be
highlighted.
then press the left and right arrow buttons
to move the cursor back and forth in the
Select character set
Press the arrow buttons to step to the character set
character sets: upper or lower case, normal or
special letters and numbers and symbols.
Note: Lower case characters are only available for the
Block font.
Important note:
In alphabet mode, sequencing will not be activated until
will always appear blank when entering alphabet mode.
If a sequence is created and you exit alphabet mode then
will reappear when another character is selected or if
sequencing (7) is pressed. The selected character will be
added at the end of the previously created sequence.
36
2
1
3
4
6
A
B
5
7