Removing And Reinstalling The Main Parts - Sharp CD-C410H Service Manual

REMOVING AND REINSTALLING THE MAIN PARTS

CD MECHANISM SECTION
Perform steps 1, 2, 3, 10 and 11 of the disassembly method
to remove the CD mechanism.
How to remove the loading motor
(See Fig. 9-1)
1. Remove the screws (A1) x 2 pcs., to remove the loading
motor.
How to remove the pickup (See Fig. 9-2)
1. Remove the screws (C1) x 2 pcs., to remove the shaft (C2).
2. Remove the stop washer (C3) x 1 pc., to remove the gear
(C4).
3. Remove the pickup.
Loading Motor
( C1 ) x2
2.6 x6mm
( C2 ) x1
( C3 ) x1
– 9 –
CD-C410H,CP-C410
( A1 ) x2
ø2 x5mm
Figure 9-1
Pickup
CD Mechanism
( C4 ) x1
Figure 9-2