Additional Information; Safety Instructions; General Precautions; Servicing - Team Electronic RoadCom-Multi Norm Operating Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

ENGLISH

1) Safety instruction

Drivers must keep attention about traffic rules by using the transceiver in a vehicle. Drivers

should use an assembly for handsfree radio operation while driving, for example the VOX

function or a handsfree microphone set like TEAM DM-106VOX.

The unit radiates RF energy in transmit mode. Please keep an eye on safety distance to the

antenna.

2) General precautions

Protect the set from humidity and dust. Do not store at places where the temperature may

rise and cause damage, for example in the sun. The set can be cleaned by wiping with a soft

cloth. Do not use chemical products to clean the set.

3) Servicing

The device must not be opened. Independent repairs or adjustment must not be carried out,

since each modification or unauthorised intervention will result in the cancelling of the oper-

ating permit and of the warranty and repair claims. Do not use the set if it seems not to func-

tion correctly. Disconnect the set in this case from the DC power source immediately. If there

is a defect, the authorised TEAM specialist dealer or TEAM must be contacted in every case.

4) Conformity

The CB mobile transceiver TEAM RoadCOM complies to the European directive R&TTE and

meets the European standards EN 300 135, MPT 1382, EN 300 433, EN 301 489-1/-13

and EN 60950.

The type with the three-stage push-switch "RoadCOM-uk Multi Norm" is meant for distribu-

tion and use in the following countries: Belgium*, France*, Germany, Great Britain*,

Netherlands, Portugal*, Spain*.

The type with the three-stage push-switch "RoadCOM Multi Norm" is meant for distribution

and use in the following countries: Austria*, Belgium*, France*, Germany, Netherlands,

Norway, Italy*, Portugal*, Spain*, Sweden.

The type without the three-stage push-switch "RoadCOM-c" ( Version "4000" ) is meant for

distribution and use in the following countries: Austria, Denmark, Germany, Norway and

Sweden.

The type without the three-stage push-switch "RoadCOM-i" ( Version "4040" ) is meant for

distribution and use in the following countries: Belgium*, Germany, Finland, Netherlands,

Norway**, Portugal*, Sweden**, Switzerland*.

The type without the three-stage push-switch "RoadCOM-hp" ( Version "4040" with 4 W AM )

is meant for distribution and use in the following countries: France, Italy*, Spain*.

The type without the three-stage push-switch "RoadCOM-df" ( Version "4340" with 3 delta

fishing frequencies ) is meant for distribution and use in the following countries:

Netherlands*, Licence necessary

*=Registration and/or licence

**=FM only

Specifications are subject to change without any prior notice or obligation on the part of the

manufacturer.