Assembling Your Steam Mop; Pro Steam Pocket - Shark S3901NZ Owner's Manual

Assembling Your Steam Mop

IMPORTANT: Always make sure the mop is
UNPLUGGED from the wall when not in use.
Never fill the mop, attach the mop head,
change or remove the cleaning pocket when
the mop is plugged into the wall. To prolong
the life of your Shark
Pocket Mop we recommend using distilled
®
water. Make sure you only add water to the
tank. Chemicals or cleaning solution may
damage the appliance and could be unsafe for
you and your family.
fig. 1
Lift-Away Pro Steam
® ™
STEAM MOP ASSEMBLY
1
Insert the Mop Handle end labelled " " into the
Steam Mop Housing lined up with Shark
sure it is inserted past the line printed on the pole.
Secure the assembled handle and pole by using the
large screw and a Phillips or a flat head screw driver
(screwdriver not included). (fig. 1)
2
Insert the Handheld Steamer into the Steam Mop
Housing. (fig. 2)
CUSTOMER CARE - AU: 1800 890 840
fig. 2
. Make
®
6