Medisana 88310 Instruction Manual page 43

Data memory
For reference, the device saves the data from two therapies every day (e.g. in
the morning and afternoon).
Enter the date/time
The device counts the therapy days with a simple clock. To set this clock:
1. Activate the device with the button
2. Hold the button
sounds. The display
show the hour of the internal clock.
3. With the control set the therapy day (1 to 30).
4. With the control set the hour of the day (0 to 23).
5. Briefl y press the button
The internal clock has been set.
Read the memory
1. Activate the device with the button
2. Press and hold the button
brief signal sounds. If no data has been saved, the notice "ZERO" will briefl y
appear on the display
3. Otherwise the following displays will become visible:
• the therapy day, beginning with 1
• the number of the therapy session for the day (1 or 2)
• the pulse form
• the therapy duration
• the program number
• the therapy mode
4. Briefl y press the button
and will now show the average current intensities for the two channels
(identifi able by the channel numbers next to the numbers).
5. Briefl y press the button
6. With the control , increase or decrease the therapy day.
7. With the control , switch between the therapy sessions 1 and 2.
8. To delete all saved therapy sessions, push and hold the button
approximately 5 seconds until a brief signal sounds. The status "CLR" will
briefl y appear on the display
9. To end the function, briefl y press the button
" ".
"Set" for approximately 5 seconds until a short signal
will now show the therapy day, the display
" ".
" ".
"Memory" for approximately 5 seconds until a
and the function is ended.
"P" to read the current intensities. The displays
"P" again in order to show the therapy day again.
and the data will be deleted.
Application
"M" for
" ".
GB
will
37