Required Time; Setting The Buzzer; Changing Settings - Panasonic NA-107VC5 Operating Instructions & Installation Instructions

Table of Contents

Advertisement

7.
Press the Start button.
The appliance starts supplying water
after draining.
Note
-
Whenever you start washing, the
process display flashes to show
which function is in progress.
-
Before any programme is started, the
appliance first drains out any water.
The buzzer will sound and "END"
will flash on the display when the
programme has finished, and the door
will unlock immediately.
Caution
After a high temperature wash, be
careful to not burn yourself when
handling the laundry or touching
the inside of the drum.
Note
-
If the detergent is not completely
removed from the laundry by using
the basic programme, use the
Dodatkowe płukanie (Extra Rinse)
function.
-
If the load is big, the laundry may
stick to the inside of the drum. This
is normal.
-
Leave the appliance door open
to allow the drum to dry out after
removing the laundry.
-
Remove the laundry and rearrange
where necessary. Do not leave it in
the drum too long after the programme
ends, because colours may run.
NA-107VC5_English_Polish.indb 19

Required time

Times depend on the programmes and
temperature settings that have been
selected.
-
Actual times may differ slightly from
those shown.
-
The displayed times include the time
needed for the water to fill up and to
drain out, thus they vary depending on
water pressure, drainage and amount of
laundry.
-
If the laundry in the drum needs to be
balanced, times will be extended.

Setting the buzzer

To turn on or turn off the buzzer which
sounds when the programme has finished,
follow these instructions.
Simultaneously press and hold the
Temperature and Czas (Time) buttons
for at least 3 seconds.
The buzzer setting will be turned off after
a beep is heard.
The buzzer setting will be turned on after
two beeps are heard.

Changing settings

After washing has started, the programme,
temperature, preset time and Dodatkowe
płukanie (Extra Rinse) function cannot be
changed.
To change the programme, temperature,
preset time, or Dodatkowe płukanie (Extra
Rinse) function settings, turn the appliance
off and then on again.
Washing Instructions - 19
Washing
2016-6-1 15:00:43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents